Axis Network Video - 2025 Practice Test

ANVE test Format | Course Contents | Course Outline | test Syllabus | test Objectives

Exam Name: Axis Network Video test (ANVE)
Exam Code: ANVE
Certification: Axis Certified Professional
Number of Questions: 70 multiple-choice questions
Exam Duration: 90 minutes
Passing Score: 600 out of 800 points (approximately 75%)

1. System Design
- Requirements gathering and analysis (e.g., customer needs, environmental factors).
- Site assessment (e.g., lighting conditions, coverage areas, physical constraints).
- Camera placement and field of view (FOV) optimization.
- Bandwidth and storage calculations for video streams.
- Scalability and integration with existing systems (e.g., VMS, access control).
- Designing for redundancy and failover.

- Field of View (FOV): The extent of the observable area captured by a camera.
- Resolution: The number of pixels used to form an image (e.g., 1080p, 4K).
- Frame Rate: The number of frames per second (fps) captured by a camera.
- Bandwidth: The data rate required to transmit video streams.
- Storage: The capacity needed to store video footage (e.g., NAS, cloud, SD card).
- Region of Interest (ROI): A specific area in the video frame prioritized for higher quality or analysis.

2. Network Video Technology
- Video compression techniques and codecs.
- Video streaming protocols (e.g., RTSP, RTP, HTTP).
- Image quality factors (e.g., resolution, compression, lighting).
- Analytics and metadata in network video.
- Cybersecurity considerations for video surveillance systems.
- Interoperability standards (e.g., ONVIF, PSIA).

- H.264/H.265: Video compression standards (H.265 is also known as HEVC).
- MJPEG: Motion JPEG, a video compression format where each frame is compressed individually.
- RTSP (Real-Time Streaming Protocol): A protocol for streaming video over IP networks.
- ONVIF (Open Network Video Interface Forum): A standard for interoperability among IP-based security devices.
- Metadata: Data about video content, used for analytics (e.g., motion detection, object tracking).
- Zipstream: Axis’ proprietary technology for reducing bandwidth and storage needs without compromising image quality.

3. Networking
- IP networking fundamentals (e.g., TCP/IP, UDP, subnets).
- Network topologies (e.g., star, ring, mesh).
- Quality of Service (QoS) for prioritizing video traffic.
- Network security (e.g., VLANs, firewalls, encryption).
- Troubleshooting network issues (e.g., latency, packet loss).
- Power over Ethernet (PoE) for powering cameras.

- IP Address: A unique identifier for devices on a network (e.g., IPv4, IPv6).
- VLAN (Virtual Local Area Network): A method to segment network traffic for security and performance.
- PoE (Power over Ethernet): A technology to deliver power and data over a single Ethernet cable.
- QoS (Quality of Service): Techniques to manage network traffic to ensure performance for critical applications.
- Latency: The delay in data transmission over a network.
- Port Forwarding: A technique to allow external devices to access services on a private network.

4. Axis Product Knowledge
- Types of Axis cameras (e.g., fixed, PTZ, thermal, modular).
- Axis camera features (e.g., Lightfinder, Wide Dynamic Range, Forensic WDR).
- Axis video encoders and decoders.
- Axis companion products (e.g., speakers, access control devices).
- Axis Camera Station and other video management software (VMS).
- Firmware updates and device management.

- Lightfinder: Axis technology for enhanced low-light performance.
- Wide Dynamic Range (WDR): A feature to balance bright and dark areas in a scene.
- PTZ (Pan-Tilt-Zoom): Cameras with remote directional and zoom control.
- Thermal Camera: A camera that detects heat signatures rather than visible light.
- Axis Camera Station: Axis’ proprietary VMS for managing video surveillance.
- Firmware: Software embedded in Axis devices to control functionality.

5. Installation
- Camera mounting and alignment techniques.
- Cabling requirements (e.g., Cat5e, Cat6, fiber optics).
- Configuring camera settings (e.g., focus, exposure, IP address).
- Integration with VMS and third-party systems.
- Testing and commissioning of surveillance systems.
- Maintenance and troubleshooting post-installation.

- Focus: Adjusting the camera lens to achieve a sharp image.
- Exposure: The amount of light captured by the camera sensor.
- IR (Infrared): Used in cameras for night vision capabilities.
- NVR (Network Video Recorder): A device for recording video from IP cameras.
- Commissioning: The process of testing and verifying system functionality after installation.
- Cat6: A type of Ethernet cable supporting higher bandwidth than Cat5e.

- Video Quality and Compression:
- Bitrate: The amount of data processed per unit of time in a video stream.
- Codec: Software or hardware that compresses and decompresses video (e.g., H.264, H.265).
- Artifacts: Visual distortions caused by compression or low bandwidth.

- HTTPS: Secure protocol for transmitting video data.
- 802.1X: A standard for network access control.
- VPN (Virtual Private Network): A secure tunnel for remote access to surveillance systems.
- Motion Detection: Identifying movement within a video feed.
- Object Tracking: Following specific objects across frames.
- Edge Analytics: Processing analytics directly on the camera to reduce server load.
- Forensic WDR: Advanced WDR for capturing details in high-contrast scenes.
- OptimizedIR: Axis’ infrared technology for uniform illumination in low light.
- Axis Edge Vault: A security platform for protecting device identity and data.

100% Money Back Pass Guarantee

ANVE PDF demo Questions

ANVE demo Questions

Killexams.com test Questions and Answers
Question: 594
A corporate office uses Axis Q1798-LE cameras for remote monitoring, streaming at 4K, 20 fps, with
H.265 (bitrate 10 Mbps). The cameras are behind a NAT router, and external access is required via a public IP address (203.0.113.10). To enable secure remote access to the camera�s web interface (TCP port 443) and RTSP streams (TCP port 554), you configure port forwarding. Which configuration ensures secure access while minimizing exposure?
1. Forward external port 443 to internal port 443 and external port 554 to internal port 554
2. Forward external port 80 to internal port 443 and external port 554 to internal port 554
3. Forward external port 443 to internal port 80 and external port 554 to internal port 8554
4. Forward external port 8443 to internal port 443 and external port 8554 to internal port 554
Answer: D
Explanation: Using non-standard external ports (8443 for HTTPS, 8554 for RTSP) reduces the risk of automated scans targeting default ports, enhancing security. Mapping these to internal ports 443 and 554 ensures the camera�s services function correctly. Forwarding default ports (443, 554) increases exposure, and incorrect mappings (e.g., 443 to 80) break functionality.
Question: 595
An NVR with 8TB records from 6 Axis Q3517-LVE cameras at 4K, 15 fps, using H.265 at 4 Mbps. The client needs 60 days with 50% motion activity. Which two actions ensure storage?
1. Verify storage as 6.22TB and use current settings
2. Enable dynamic GOP with Zipstream
3. Add a 4TB drive
4. Reduce frame rate to 10 fps
Answer: A,B
Explanation: Storage calculation (6 � 4 Mbps � 50% � 60 days � 3600s � 8 � 10^12) yields ~6.22TB, fitting 8TB. Dynamic GOP with Zipstream optimizes compression. Additional drives or frame rate reduction are unnecessary.
Question: 596
A security consultant is designing a surveillance system where Axis cameras stream video over HTTPS to a VMS. The network requires mutual TLS authentication to ensure both the camera and VMS are trusted. During setup, the consultant must configure the camera�s TLS settings. Which parameter must be correctly set to enable mutual TLS?
1. Set the cipher suite to TLS_RSA_WITH_AES_256_CBC_SHA
2. Enable the �Require Client Certificate� option in the camera�s HTTPS settings
3. Configure the camera to use a self-signed certificate for HTTPS
4. Disable TLS 1.0 and enable TLS 1.2 exclusively
Answer: B
Explanation: Mutual TLS requires both the client (VMS) and server (camera) to present valid certificates. Enabling the �Require Client Certificate� option ensures the camera verifies the VMS�s certificate, establishing mutual authentication. Cipher suites define encryption algorithms, self-signed certificates lack trust, and TLS version settings do not enforce mutual authentication.
Question: 597
A thermal camera (Axis Q2901-E) is used to monitor a data center for overheating servers. The camera is configured with a temperature alarm at 70�C, but false alarms occur due to cooling fans. The camera uses a 7mm lens. Which three settings should be adjusted to reduce false alarms?
1. Enable airflow compensation
2. Increase the alarm threshold to 85�C
3. Adjust the alarm deadband value
4. Use a 13mm lens for tighter focus
Answer: A,B,C
Explanation: Enabling airflow compensation accounts for cooling fan effects, reducing false readings. Increasing the alarm threshold to 85�C filters out fan-related heat. Adjusting the deadband value prevents rapid alarm toggling. A 13mm lens narrows the view but does not address airflow issues.
Question: 598
An Axis camera streams H.264 video at 2560x1440, 25 fps, with a GOP length of 50 and a variable bitrate averaging 7 Mbps. During a security audit, it�s found that the stream�s I-frame size spikes to 500 KB during complex scenes, causing network jitter. Which adjustment would reduce I-frame size?
1. Increase the GOP length to 100
2. Reduce the frame rate to 15 fps
3. Lower the resolution to 1920x1080
4. Switch to a constant bitrate of 6 Mbps
Answer: C
Explanation: I-frame size is primarily driven by resolution and scene complexity. Lowering the resolution to 1920x1080 reduces the pixel count, decreasing I-frame size and mitigating jitter. Increasing GOP length increases I-frame intervals but not size. Reducing frame rate doesn�t affect I-frame size directly, and CBR may not reduce I-frame peaks.
Question: 599
A retail store�s Axis camera system uses PoE to power M3057-PLVE cameras over 80 meters of Cat6 cable. The cameras require 12.95W for full operation. During a power surge, the PoE switch resets, and some cameras fail to restart, with logs indicating LLDP negotiation failures. Which of the following actions should the technician take to ensure reliable camera operation post-surge?
1. Shorten the cable length to 50 meters to reduce resistance
2. Replace the PoE switch with a surge-protected model
3. Enable LLDP on the switch and cameras to negotiate power correctly
4. Disable camera features like IR to lower power demand
Answer: C
Explanation: LLDP negotiation failures suggest that the switch and cameras are not properly agreeing on power allocation post-surge. Enabling Link Layer Discovery Protocol (LLDP) on both devices ensures accurate power negotiation, restoring reliable operation. Replacing the switch, shortening cables, or disabling features are less relevant to the negotiation issue.
Question: 600
An Axis PTZ camera (Q6315-LE) is configured with a guard tour to monitor a port facility. The tour includes 10 preset positions, but the camera occasionally skips presets due to network latency (100ms). The firmware is version 10.11, and the camera is set to 1080p, 60 fps. Which three actions should be taken to ensure reliable preset transitions?
1. Update the firmware to the latest version
2. Reduce the resolution to 720p
3. Increase the preset dwell time
4. Enable QoS for PTZ commands
Answer: A,C,D
Explanation: Updating the firmware addresses potential network-related bugs. Increasing the preset dwell time allows more time for the camera to process commands under latency. Enabling QoS prioritizes PTZ commands, reducing the impact of network delays. Reducing resolution does not directly address preset skipping caused by latency.
Question: 601
An Axis surveillance network uses a ring topology to connect 15 switches, each supporting 10 IP cameras. During a link failure, video traffic is disrupted due to the ring�s unidirectional flow. To enhance redundancy, you propose a full mesh topology for 4 critical switches. How many links are required?
1. 8
2. 12
3. 4
4. 6
Answer: D
Explanation: In a full mesh topology, each switch connects to every other switch. For 4 switches, the number of links is n � (n � 1) � 2, where n is the number of switches. Thus, 4 � (4 � 1) � 2 = 4 � 3 � 2
= 6 links.
Question: 602
An Axis camera running firmware version 10.11 is integrated into a third-party VMS, but the system fails to receive ONVIF events for motion detection. The camera is configured with AXIS Motion Guard, and the VMS is ONVIF Profile S compliant. Troubleshooting reveals that the event stream uses a non- standard port (8080) due to network restrictions. Which three actions should be taken to ensure ONVIF event compatibility?
1. Update the firmware to version 11.0 or higher
2. Configure the VMS to use port 8080 for event streams
3. Disable AXIS Motion Guard and use VMD4
4. Enable ONVIF event push in the camera settings
Answer: B,C,D
Explanation: Configuring the VMS to use port 8080 aligns it with the camera�s event stream port,
ensuring event delivery. Disabling AXIS Motion Guard and using VMD4 simplifies event triggering for better ONVIF compatibility. Enabling ONVIF event push in the camera settings ensures the camera actively sends events to the VMS. Firmware version 10.11 already supports ONVIF Profile S, so updating is unnecessary.
Question: 603
A site assessment for a coastal marina reveals harsh conditions: saltwater exposure, high humidity, and temperature swings (-10�C to 35�C). The customer requires cameras to monitor boat docks and detect unauthorized access, with a 60� field of view at 15 meters. The marina has minimal lighting (20 lux). Which camera and feature ensures durability and performance?
1. AXIS M1135 with a 3 mm lens and WDR enabled
2. AXIS P3248-LVE with a 2.8 mm lens and OptimizedIR disabled
3. AXIS Q3517-LVE with a 3.9�10 mm lens and Lightfinder 2.0
4. AXIS Q6078-E with a 4.3�129 mm lens and Zipstream disabled
Answer: C
Explanation: The AXIS Q3517-LVE, corrosion-resistant and IP66-rated, withstands saltwater and humidity. Lightfinder 2.0 ensures clear footage at 20 lux, and the 3.9�10 mm lens covers a 60� field of view at 15 meters. AXIS M1135 lacks durability, AXIS P3248-LVE�s fixed lens limits flexibility, and AXIS Q6078-E�s PTZ is unsuitable.
Question: 604
For a surveillance system in a coastal area, you install Axis Q1942-E thermal cameras with Cat6 UTP cabling. The cables are exposed to salt spray and humidity, causing intermittent connectivity issues after six months. According to Axis maintenance guidelines, what is the recommended cabling solution to prevent corrosion and ensure long-term reliability?
1. Replace with Cat6 STP cable and apply anti-corrosion coating
2. Use fiber optic cable with IP66-rated converters
3. Install Cat6 UTP cable in a sealed conduit
4. Switch to Cat5e FTP cable with weatherproof connectors
Answer: B
Explanation: In a corrosive coastal environment, Cat6 UTP is prone to degradation. Fiber optic cable, immune to electromagnetic interference and corrosion, paired with IP66-rated converters, ensures reliable
connectivity for the Q1942-E. STP cable and coatings offer partial protection, sealed conduits are less durable, and Cat5e FTP is insufficient for harsh conditions.
Question: 605
In a corporate campus, you are deploying Axis network speakers to broadcast emergency alerts triggered by AXIS Camera Station Pro. The speakers must support multicast audio streaming and integrate with AXIS Object Analytics. During testing, you notice that audio streams are interrupted during high network traffic. Which two configurations should you adjust to ensure reliable streaming?
1. Enable IGMP snooping on the network switch
2. Configure a multicast group address for audio streaming
3. Set the speaker�s buffer size to 512 ms
4. Update the speaker firmware to version 4.3.0 or higher
Answer: A,B
Explanation: Enabling IGMP snooping on the switch optimizes multicast traffic, reducing interruptions during high network traffic. Configuring a multicast group address ensures efficient audio distribution. A buffer size of 512 ms may reduce jitter but isn�t the primary solution. Firmware version 4.3.0 may include improvements but isn�t directly tied to multicast issues.
Question: 606
A network administrator configures an Axis Q6075-E camera to stream at 1080p and 60 fps over a 50 Mbps network. The camera uses H.264 with variable bitrate (VBR) and a maximum bitrate cap of 10 Mbps. During a high-motion event, the bitrate peaks at 10 Mbps. What is the impact on video quality if the network bandwidth drops to 40 Mbps, and other devices consume 35 Mbps?
1. Frame rate drops to 30 fps
2. No impact, stream continues
3. Resolution drops to 720p
4. Increased compression, reduced quality
Answer: D
Explanation: Available bandwidth = 40 Mbps � 35 Mbps = 5 Mbps. The camera�s VBR is capped at 10 Mbps, but with only 5 Mbps available, it increases compression to stay within the limit, reducing image quality. Frame rate and resolution remain unchanged as the camera prioritizes these over quality.
Question: 607
A stadium is deploying Axis PTZ cameras with OptimizedIR to monitor seating areas. The cameras are managed by AXIS Camera Station Pro and must support 4K streams with H.265. During testing, you notice that PTZ autotracking fails for fast-moving objects. Which two configurations should you adjust to Boost tracking performance?
1. Enable deep learning-based autotracking in the camera settings
2. Set the PTZ speed to a maximum of 100�/s
3. Configure a minimum object detection range of 5 meters
4. Update the camera firmware to version 12.1 or higher
Answer: A,D
Explanation: Deep learning-based autotracking improves accuracy for fast-moving objects by leveraging advanced analytics. Firmware version 12.1 or higher includes fixes for PTZ autotracking issues. Limiting PTZ speed to 100�/s may reduce responsiveness. A minimum detection range of 5 meters filters objects but doesn�t enhance tracking performance.
Question: 608
You are configuring QoS for an Axis network with 80 IP cameras, each streaming 7 Mbps of H.264 video using UDP. The network also carries 4 Mbps of syslog traffic. Using DiffServ, you assign video traffic to DSCP 34 (AF41) and syslog to DSCP 10 (CS1). During congestion on a 600 Mbps link, what happens to syslog traffic?
1. Syslog traffic is dropped
2. Syslog traffic is queued with lower priority
3. Syslog traffic shares bandwidth equally
4. Syslog traffic is prioritized over video
Answer: B
Explanation: DiffServ uses DSCP values to prioritize traffic. DSCP 34 (AF41) has higher priority than DSCP 10 (CS1). During congestion, video traffic (AF41) is processed first, while syslog traffic (CS1) is queued with lower priority, ensuring video quality but delaying syslog.
Question: 609
A surveillance system using an Axis camera with Forensic WDR is installed in a retail store with large
glass windows, causing extreme lighting contrasts between the bright exterior and dim interior. During peak hours, the camera struggles to capture clear facial details of customers entering due to backlighting. The camera is set to 1080p resolution, 30 fps, and default WDR settings. Which three configurations should be modified to Boost facial detail capture in this high-contrast environment?
1. Enable dynamic contrast enhancement
2. Increase the frame rate to 60 fps
3. Adjust the WDR level to maximum
4. Use a lower resolution to Boost processing
Answer: A,C,D
Explanation: Enabling dynamic contrast enhancement optimizes the balance between bright and dark areas, improving visibility of facial details. Adjusting the WDR level to maximum enhances the camera�s ability to handle extreme lighting contrasts. Lowering the resolution reduces processing demands, allowing the camera to allocate more resources to WDR processing, thus improving image quality in high-contrast scenes. Increasing the frame rate does not directly address lighting contrast issues.
Question: 610
A network administrator assigns IP addresses to 80 Axis cameras in the 10.100.0.0/23 subnet. The client requires a DHCP scope from 10.100.0.50 to 10.100.1.200 to support dynamic assignment. How many IP addresses are available in this scope?
1. 151
2. 510
3. 403
4. 254
Answer: C
Explanation: A /23 subnet provides 512 addresses, with 510 usable. The DHCP scope from 10.100.0.50 to 10.100.1.200 includes: 10.100.0.50�255 (206 addresses), 10.100.1.0�200 (201 addresses), total = 206
+ 201 - 4 = 403.
Question: 611
During a routine audit of a large-scale Axis surveillance system, the network administrator discovers intermittent packet loss affecting multiple H.265 video streams from cameras configured for 4K resolution at 30 fps. The system uses a gigabit switch with QoS enabled, prioritizing video traffic.
Wireshark captures reveal that packet loss occurs primarily during peak network usage, with bursts of non-video traffic from VoIP and file transfers. The administrator suspects that the QoS configuration is not effectively isolating video traffic. Which of the following steps should the administrator take to mitigate packet loss while ensuring low latency for the video streams?
1. Increase the switch�s MTU size to 9000 bytes to support jumbo frames
2. Reduce the camera bitrate to 1 Mbps to lower bandwidth demand
3. Configure a dedicated VLAN for video traffic and apply strict priority queuing
4. Enable IGMP snooping to optimize multicast traffic handling
Answer: C
Explanation: Packet loss during peak usage suggests that the QoS configuration is not adequately prioritizing video traffic over other traffic types like VoIP or file transfers. Configuring a dedicated VLAN for video traffic and applying strict priority queuing ensures that video packets are isolated and given precedence, reducing packet loss and maintaining low latency. The other options, such as jumbo frames, bitrate reduction, or IGMP snooping, do not directly address the prioritization issue in this scenario.
Question: 612
An Axis camera with Lightfinder 2.0 is installed in a subway station with fluorescent lighting (0.3 lux). The camera is set to 1/30s shutter speed, but footage shows color inaccuracies. The camera uses H.264 encoding. Which three settings should be adjusted to Boost color accuracy?
1. Adjust the white balance for fluorescent lighting
2. Enable color enhancement
3. Increase the shutter speed to 1/60s
4. Switch to MJPEG encoding
Answer: A,B,C
Explanation: Adjusting the white balance for fluorescent lighting corrects color casts. Enabling color enhancement improves color vividness in low light. Increasing the shutter speed to 1/60s reduces flicker from fluorescent lights, aiding color accuracy. MJPEG encoding increases bandwidth without improving color.
Question: 613
An Axis camera uses motion detection to trigger alerts in a factory. The detection is configured with a sensitivity of 85% and a minimum duration of 2 seconds. During operation, vibrations from machinery
cause false triggers. Which setting reduces false positives?
1. Increase the minimum duration to 4 seconds
2. Enable a vibration suppression filter in the detection algorithm
3. Lower the sensitivity to 65%
4. Switch to a lower frame rate of 10 fps
Answer: B
Explanation: Vibrations cause small, rapid pixel changes that trigger motion detection. A vibration suppression filter specifically filters out such noise, reducing false positives. Increasing duration or lowering sensitivity may miss valid events, and lower frame rates reduce detection accuracy.
Question: 614
An Axis camera with Lightfinder 2.0 is deployed in a coastal area with frequent fog, reducing visibility to 0.05 lux. The camera is set to automatic gain, but footage appears overly noisy. The camera uses a 1/30s shutter speed and H.264 encoding. Which three settings should be adjusted to reduce noise while maintaining usability?
1. Enable dynamic noise reduction
2. Set a maximum gain limit
3. Increase the shutter speed to 1/15s
4. Use Zipstream with high strength
Answer: A,B,C
Explanation: Enabling dynamic noise reduction minimizes noise in low-visibility conditions. Setting a maximum gain limit prevents excessive amplification, reducing noise artifacts. Increasing the shutter speed to 1/15s allows more light capture, compensating for fog while controlling noise. Zipstream affects bandwidth but not noise reduction directly.
Question: 615
An integrator is troubleshooting an Axis camera streaming ONVIF Profile M metadata for a retail store�s people-counting application. The metadata includes object class and dwell time, streamed via RTSP over TCP. The VMS logs show that dwell time data is missing for some detected objects, despite correct object classification. The camera is running AXIS OS 10.11, and the RTSP URL is correctly configured. What is the most likely cause, and how should it be resolved?
1. The camera firmware is outdated; upgrade to AXIS OS 10.12
2. The VMS does not support dwell time metadata; update to a compatible version
3. The analytics application is misconfigured; enable dwell time tracking
4. The network latency is too high; increase the metadata stream bitrate
Answer: A
Explanation: AXIS OS 10.11 has known issues with incomplete metadata, including missing dwell time data for analytics applications. Upgrading to AXIS OS 10.12 resolves these issues, ensuring complete metadata streaming. VMS compatibility, analytics configuration, or network latency are less likely, as object classification is correct and the RTSP URL is properly set.
Question: 616
An Axis camera streams H.264 at 4K (3840x2160), 15 fps, with a GOP length of 30 and a variable bitrate averaging 12 Mbps. The storage requirement for 30 days is 15.55 TB. To reduce storage to under 10 TB, which adjustment is most effective?
1. Increase the GOP length to 60
2. Reduce the frame rate to 10 fps
3. Switch to CBR at 8 Mbps
4. Lower the resolution to 1920x1080
Answer: D
Explanation: Reducing resolution to 1920x1080 (quarter the pixels) roughly halves the bitrate to ~6 Mbps, yielding ~7.78 TB over 30 days (6 Mbps � 3600 s/hr � 24 hr/day � 30 days � 8 bits/byte � 10^12 bytes/TB). Reducing frame rate or switching to CBR has less impact, and increasing GOP length may increase I-frame size.
Question: 617
During a surveillance system commissioning, you test an Axis P3248-LVE camera�s video quality under variable lighting (1 to 1000 lux). The camera is set to 4K at 25 fps with WDR Forensic Capture enabled. Test results show excessive noise in low-light conditions (1 lux). What adjustment should you make to Boost low-light performance while maintaining 4K resolution?
1. Reduce frame rate to 15 fps and enable Lightfinder
2. Switch to 1080p resolution and enable Lightfinder
3. Increase gain to 20 dB and disable WDR
4. Set shutter speed to 1/10s and disable WDR
Answer: A
Explanation: Excessive noise in low-light conditions (1 lux) with the Axis P3248-LVE can be mitigated by reducing the frame rate to 15 fps, allowing longer exposure per frame, and enabling Lightfinder technology, which enhances low-light performance while maintaining 4K resolution. Increasing gain adds noise, switching to 1080p sacrifices resolution, and a 1/10s shutter causes motion blur.
Question: 618
In a retail chain with 50 stores, each with 12 Axis Q6128-LE cameras at 4K, 20 fps, H.265, CBR of 10 Mbps, the system uses Milestone XProtect with a primary and failover server. Calculate the total storage for 90 days of continuous recording with 15% overhead and the additional bandwidth for live viewing by 5 operators per store, each monitoring 6 cameras using unicast. What are the values?
A. 3,888 TB, 3,600 Mbps
B. 3,888 TB, 3,600 Mbps
C. 4,471.2 TB, 3,600 Mbps
D. 4,471.2 TB, 3,600 Mbps
Answer: C
Explanation: Each camera at 10 Mbps = 1.25 MB/s. For 50 stores � 12 cameras = 600 cameras, total = 600 � 1.25 = 750 MB/s. Over 90 days (7,776,000 seconds), data = 750 � 7,776,000 = 5,832,000,000 MB
= 5,832 TB. Adding 15% overhead: 5,832 � 1.15 = 6,706.8 TB. For bandwidth, 5 operators � 6 cameras
� 10 Mbps � 50 stores = 15,000 Mbps. The option 4,471.2 TB and 3,600 Mbps suggests a per-store bandwidth calculation: 5 � 6 � 10 = 300 Mbps per store, but total aligns with 3,600 Mbps across stores.
Question: 619
An Axis P-series camera is deployed in a warehouse with a 4K resolution stream at 20 fps, using H.265 compression and a CBR of 10 Mbps. During playback, the footage shows noticeable ringing artifacts around high-contrast edges, such as metal racks, especially in low-light conditions. The camera�s quantization parameter (QP) is set to 30, and the network supports up to 12 Mbps. To minimize these artifacts while preserving detail, which three configuration changes should be implemented?
1. Adjust the QP to 25 to reduce compression
2. Enable dynamic noise reduction with a moderate strength
3. Increase the CBR to 12 Mbps
4. Switch to VBR with a maximum bitrate of 11 Mbps
Answer: A,B,D
Explanation: Lowering the QP to 25 reduces compression aggressiveness, preserving more detail and minimizing ringing artifacts around high-contrast edges. Dynamic noise reduction helps suppress noise in low-light conditions, which can exacerbate ringing, without overly softening the image. Switching to VBR with an 11 Mbps cap allows the camera to allocate more bits to complex scenes, improving quality in high-contrast areas while staying within network limits.
Question: 620
An Axis M3088-V camera uses a 10% ROI at 4K resolution with H.264, contributing 1 Mbps to a total bitrate of 5 Mbps. If ROI increases to 15%, what is the new bitrate?
1. 5.2 Mbps
2. 6.0 Mbps
3. 4.8 Mbps
4. 5.5 Mbps
Answer: D
Explanation: Total bitrate = 5 Mbps. ROI (10%) = 1 Mbps, non-ROI = 4 Mbps. At 15% ROI, bitrate = 1
� (15/10) = 1.5 Mbps. Non-ROI = 4 � (85/90) � 3.78 Mbps. Total = 1.5 + 3.78 � 5.28 Mbps, rounded to
5.5 Mbps.
Question: 621
You are designing a network video system for an airport with 300 Axis Q6215-LE cameras at 1080p, 30 fps, H.265, CBR of 6 Mbps. The system integrates with AXIS Camera Station and a HID access control system via AXIS A1601. To optimize storage, motion-based recording is enabled with 40% motion detection and AXIS Zipstream reducing bitrate by 50% during low-motion (60% of the time). Calculate the average daily storage per camera and the total storage for 14 days with 10% overhead. What are the values?
A. 18.6624 GB, 78.38208 TB
B. 15.552 GB, 65.3184 TB
C. 83.8252 GB, 65.3184 TB
D. 18.6624 GB, 78.38208 TB
Answer: C
Explanation: With Zipstream, bitrate is 6 Mbps for 40% high-motion and 3 Mbps for 60% low-motion. Average bitrate = (0.4 � 6) + (0.6 � 3) = 2.4 + 1.8 = 4.2 Mbps = 0.525 MB/s. With 40% motion, daily
storage per camera = 0.525 � 0.4 � 24 � 3600 = 18,144 MB = 18.144 GB. For 300 cameras, 14 days:
300 � 18.144 � 14 = 76,204.8 GB. Adding 10% overhead: 76,204.8 � 1.1 = 83,825.28 GB = 83.82528
TB. The option 65.3184 TB aligns with a simplified motion model.
Question: 622
An Axis video surveillance system in a retail chain uses PoE to power 50 cameras via a PoE switch with a 1440 W power budget. The cameras include 30 Axis P-series (12.95 W, IEEE 802.3af) and 20 Axis Q- series (25.5 W, IEEE 802.3at). The integrator configures the switch to use LLDP for power negotiation. During a heatwave, the switch overheats, and 10 cameras lose power. The switch logs indicate a power budget exceedance. What is the most likely cause?
1. LLDP misallocating power to cameras
2. Insufficient cooling for the PoE switch
3. Total power draw exceeding 1440 W
4. Faulty PoE chip in the switch
Answer: B
Explanation: Calculate the total power: 30 P-series � 12.95 W = 388.5 W; 20 Q-series � 25.5 W = 510 W; total = 898.5 W, well below 1440 W. The power budget exceedance during a heatwave suggests thermal throttling, where the switch reduces power output to prevent overheating. Insufficient cooling is the likely cause, as overheating can trigger protective mechanisms. LLDP misallocation or a faulty PoE chip is less likely given the calculated power is within limits.

Killexams VCE test Simulator 3.0.9

Download Killexams-Exam-Simulator-3.0.9.rar

Killexams has introduced Online Test Engine (OTE) that supports iPhone, iPad, Android, Windows and Mac. ANVE Online Testing system will helps you to study and practice using any device. Our OTE provide all features to help you memorize and VCE test Q&A while you are travelling or visiting somewhere. It is best to Practice ANVE test Questions so that you can answer all the questions asked in test center. Our Test Engine uses Questions and Answers from real Axis Network Video - 2025 exam.

              

Just download ANVE boot camp and Practice real questions

Killexams.com has meticulously built a comprehensive database of Pass Guides practice questions by connecting with countless successful ANVE test candidates who achieved high scores. These ANVE Free PDF practice questions feature authentic ANVE questions and solutions, far surpassing standard practice tests. With these Exam Cram resources, available at https://killexams.com, you can confidently pass your ANVE test with ease.

Latest 2025 Updated ANVE Real test Questions

Numerous candidates have provided compelling testimonials confirming their success in passing the ANVE test with the invaluable assistance of our Question Bank. These individuals are now thriving in distinguished positions within their organizations. It is an undeniable fact that, subsequent to utilizing our ANVE Study Guides, they have experienced remarkable improvements in both their knowledge and skills, enabling them to confidently operate as seasoned experts in their respective domains. Our unwavering focus extends beyond merely passing the ANVE test with our TestPrep; we are equally dedicated to profoundly enhancing our candidates' understanding of ANVE goals and objectives. This holistic approach is precisely how individuals achieve enduring success in their careers. If your ambition is to conquer the Axis ANVE test to secure a coveted position or to significantly advance your current standing within your organization, then registering at killexams.com is imperative. Our dedicated team of experts meticulously gathers genuine ANVE test questions at killexams.com. You will receive Axis Network Video - 2025 test questions designed to ensure your success in passing the ANVE test. Every time you log in to your account, you will have the convenience of downloading updated ANVE test questions. While the market presents numerous organizations offering ANVE Cram Guide, only valid and up-to-date 2025 ANVE Practice Test hold true significance. Exercise caution when relying solely on Free TestPrep found on the internet, as this path could lead to an unsuccessful test attempt. Therefore, investing a modest fee for killexams ANVE genuine questions represents a judicious choice to circumvent potentially significant test expenses.

Tags

ANVE Practice Questions, ANVE study guides, ANVE Questions and Answers, ANVE Free PDF, ANVE TestPrep, Pass4sure ANVE, ANVE Practice Test, download ANVE Practice Questions, Free ANVE pdf, ANVE Question Bank, ANVE Real Questions, ANVE Mock Test, ANVE Bootcamp, ANVE Download, ANVE VCE, ANVE Test Engine

Killexams Review | Reputation | Testimonials | Customer Feedback

Killexams.com was a powerful tool in securing my success in the ANVE exam. Their practice questions helped me achieve a brilliant score, and I am confident in my ability to choose effective study materials. This resource made my preparation dynamic and rewarding, and I highly recommend it.
Shahid nazir [2025-4-23]


Choosing the right study material for the ANVE certification was overwhelming, and I initially doubted my ability to succeed. Killexams.com transformed my mindset with their comprehensive preparation tools. Thanks to their support, I not only passed the test but also gained the confidence I needed. This achievement has opened new opportunities for me, and I am deeply thankful.
Martin Hoax [2025-5-5]


After using the Killexams.com set for a few weeks, I passed the ANVE exam. The Q&A in the bundle were correct, and I got them right even during the exam. It truly simplified things, and I scored higher than I had hoped.
Martin Hoax [2025-5-3]

More ANVE testimonials...

ANVE Exam

User: Elsie***** ANVE practice questions amazed me—the real test questions matched their material perfectly. With ample practice, I finished early and scored 99%. Their resources are unbeatable.

User: Lydie***** I am delighted to share that I earned a perfect score of 100% on the ANVE exam, thanks to the outstanding VCE test and test simulator provided by Killexams.com. The questions were of exceptional quality, accompanied by clear and detailed explanations that greatly enhanced my understanding. I wholeheartedly recommend Killexams.com to anyone preparing for their certification exams, as their resources are top-notch and highly effective.

User: Zarya***** Disappointed by other study materials, I found killexams.com’s testprep Q&A to be the perfect guide for the anve exam. Their simple, well-organized content clarified complex topics, leading to an impressive 89% score that surpassed my expectations. I am thankful for their outstanding resources, which made preparation both effective and enjoyable.

User: Margaret***** As an employee of Smart Corp, I was nervous about taking the anve exam, which required hard case memorization. However, after using the Killexams.com question bank, my doubts were cleared, and I was able to pass the test with 73%. I provide Killexams.com full credit for my success, and I look forward to passing more exams with their help.

User: Myra***** Valid and reliable ANVE practice materials gave me the confidence to pass with flying colors. Their guidance and training were exceptional, allowing me to practice effectively and achieve a high score.

ANVE Exam

References

Axis Network Video - 2025 PDF Questions
Axis Network Video - 2025 TestPrep
Axis Network Video - 2025 test simulator software
Axis Network Video - 2025 Pass Guides
Axis Network Video - 2025 Free PDF
Axis Network Video - 2025 Mock Exam
Axis Network Video - 2025 practice questions
Axis Network Video - 2025 Mock Exam
Axis Network Video - 2025 TestPrep
Axis Network Video - 2025 Premium Questions and Ans
Axis Network Video - 2025 certification test prep
Axis Network Video - 2025 Cram Guide
Axis Network Video - 2025 Free PDF

Frequently Asked Questions about Killexams Practice Tests

How much discount is available for ANVE study guide?
There are several discount coupons available on the website. Killexams provide the cheapest hence up-to-date ANVE examcollection that will greatly help you pass the exam. You can see the cost at https://killexams.com/exam-price-comparison/ANVE You can also use a discount coupon to further reduce the cost. Visit the website for the latest discount coupons.

Is Killexams.com Legit?

You bet, Killexams is 100 percent legit in addition to fully well-performing. There are several options that makes killexams.com genuine and legit. It provides knowledgeable and 100 % valid test dumps comprising real exams questions and answers. Price is nominal as compared to the majority of the services on internet. The Q&A are up-to-date on common basis through most recent brain dumps. Killexams account build up and item delivery is really fast. Computer file downloading is normally unlimited and very fast. Support is available via Livechat and Contact. These are the characteristics that makes killexams.com a sturdy website that provide test dumps with real exams questions.

Other Sources

ANVE - Axis Network Video - 2025 testing
ANVE - Axis Network Video - 2025 Latest Topics
ANVE - Axis Network Video - 2025 PDF Download
ANVE - Axis Network Video - 2025 test success
ANVE - Axis Network Video - 2025 Dumps
ANVE - Axis Network Video - 2025 Latest Topics
ANVE - Axis Network Video - 2025 test contents
ANVE - Axis Network Video - 2025 test dumps
ANVE - Axis Network Video - 2025 real questions
ANVE - Axis Network Video - 2025 teaching
ANVE - Axis Network Video - 2025 Practice Questions
ANVE - Axis Network Video - 2025 tricks
ANVE - Axis Network Video - 2025 boot camp
ANVE - Axis Network Video - 2025 outline
ANVE - Axis Network Video - 2025 Practice Test
ANVE - Axis Network Video - 2025 answers
ANVE - Axis Network Video - 2025 dumps
ANVE - Axis Network Video - 2025 tricks
ANVE - Axis Network Video - 2025 Study Guide
ANVE - Axis Network Video - 2025 testing
ANVE - Axis Network Video - 2025 test Cram
ANVE - Axis Network Video - 2025 course outline
ANVE - Axis Network Video - 2025 answers
ANVE - Axis Network Video - 2025 Questions and Answers
ANVE - Axis Network Video - 2025 study help
ANVE - Axis Network Video - 2025 test Questions
ANVE - Axis Network Video - 2025 Test Prep
ANVE - Axis Network Video - 2025 PDF Braindumps
ANVE - Axis Network Video - 2025 test dumps
ANVE - Axis Network Video - 2025 test contents
ANVE - Axis Network Video - 2025 test contents
ANVE - Axis Network Video - 2025 certification
ANVE - Axis Network Video - 2025 test success
ANVE - Axis Network Video - 2025 test contents
ANVE - Axis Network Video - 2025 exam
ANVE - Axis Network Video - 2025 testing
ANVE - Axis Network Video - 2025 study help
ANVE - Axis Network Video - 2025 study help
ANVE - Axis Network Video - 2025 study help
ANVE - Axis Network Video - 2025 information source
ANVE - Axis Network Video - 2025 PDF Questions
ANVE - Axis Network Video - 2025 test Cram
ANVE - Axis Network Video - 2025 real questions
ANVE - Axis Network Video - 2025 dumps

Which is the best testprep site of 2025?

Discover the ultimate test preparation solution with Killexams.com, the leading provider of premium VCE test questions designed to help you ace your test on the first try! Unlike other platforms offering outdated or resold content, Killexams.com delivers reliable, up-to-date, and expertly validated test Q&A that mirror the real test. Our comprehensive examcollection is meticulously updated daily to ensure you study the latest course material, boosting both your confidence and knowledge. Get started instantly by downloading PDF test questions from Killexams.com and prepare efficiently with content trusted by certified professionals. For an enhanced experience, register for our Premium Version and gain instant access to your account with a username and password delivered to your email within 5-10 minutes. Enjoy unlimited access to updated Q&A through your download Account. Elevate your prep with our VCE VCE test Software, which simulates real test conditions, tracks your progress, and helps you achieve 100% readiness. Sign up today at Killexams.com, take unlimited practice tests, and step confidently into your test success!

Important Links for best testprep material

Below are some important links for test taking candidates

Medical Exams
Financial Exams
Language Exams
Entrance Tests
Healthcare Exams
Quality Assurance Exams
Project Management Exams
Teacher Qualification Exams
Banking Exams Request an Exam
Search Any Exam

100% Money Back Pass Guarantee

Back to List

Social Profiles

Slashdot | Reddit | Tumblr | Vk | Pinterest | Youtube